Browse all practice questions for the NetApp Data ONTAP 8.0 7-Mode Administrator certification NS0-154 Practice Test. Search by topic, open any question and review its full explanation, then test yourself in the practice quiz.

NetApp Data ONTAP 8.0 7-Mode Administrator certification NS0-154 Practice Test course image
More practice questions

These questions are part of the practice quiz. Start practicing

  • Which command would troubleshoot an authentication error reported by an iSCSI host?
  • Which of the following is a valid data protection path for NetApp data protection solutions?
  • Which statement about NearStore Personality license is true?
  • To troubleshoot SnapMirror transfers, which directory contains the log files?
  • A snapshot is a frozen, read-only image of the entire Data ONTAP active file system that reflects the state of the ______ at the time the snapshot was created.
  • In the LUN clone command example, what is the path to the source LUN?
  • Which qtree path must not exist on the secondary system before you run the SnapVault start command?
  • Which option will allow a storage system to SnapMirror from this source system?
  • What path contains the XML preset files used to customize sysstat output?
  • Which command will show the FCP target(s) on a storage system?
  • What is the primary purpose of LUN masking in a storage environment?
  • Which command disables client access to Snapshot copies on a volume called flexvol1?
  • To view detailed information about LUNs, which option would you pass to the LUN display command?
  • What type of files are located in /etc/stats/preset used with sysstat to customize output?
  • NDVM support is available for which of the following volumes?
  • In Fibre Channel configuration, the host's HBA is referred to as the ______.
  • NetApp encryption is supported in which ONTAP versions?
  • Which statement correctly describes 64-bit aggregates in relation to FlexVols?
  • In SnapVault scheduling, what does the format cnt[@day_list][@hour_list] specify?
  • The quota resize command in NetApp Data ONTAP affects only existing entries in /etc/quotas and does not apply to new quota entries. True or False?
  • NDVM is supported on which type of volumes?
  • What is the maximum number of disk shelves per loop in a fabric-attached MetroCluster?
  • Which command would help you verify which NFS exports are visible to the client during troubleshooting?
  • To automate a single-file SnapRestore that would normally prompt for confirmation, which option can be used?
  • Are 64-bit aggregates the default setting in DOT 8.0 7-mode?
  • Open Systems SnapVault Free Space Estimator determines if there is sufficient disk space available on the primary to perform an OSSV transfer.
  • In iSCSI security, which option is primarily used for access control rather than encryption?
  • A Volume Snap Mirror from a 64-bit source to a 32-bit destination will fail when which condition is enabled on the 64-bit source?
  • In SyncMirror usage, running 'aggr mirror aggrY' without -m causes Data ONTAP to do what?
  • Which migration options are supported when upgrading from 32-bit to 64-bit: combination of qtrees via QSM and volumes via ndmpcopy corresponds to which option?
  • Which mechanism allows you to make LUNs available to some initiators and unavailable to others?
  • The ONTAP SnapVault primary license on the target storage system is required for Open System SnapVault.
  • Which of the following is NOT a replication prerequisite for SnapMirror?
  • In NetApp 7-Mode FC storage, which command displays the Fibre Channel initiator WWPNs that have logged into the storage system?
  • In Data ONTAP, Windows Administrator and root are exempt from quotas in which way?
  • After a SnapRestore reversion of a volume, which action ensures correct incremental backups?
  • SnapMirror will automatically try to restart a transfer after which event?
  • When running deduplication on SnapVault destinations, which statement is true?
  • The snapvault snap create volume snapname command can be executed on which systems?
  • A NearStore license increases the amount of concurrent replication streams.
  • Which changes the NDMP password on the Open System SnapVault agent?
  • To share the directory for a CIFS path using the share name 'netapp', which command is correct?
  • Which command on the storage system provides detailed statistics about network interfaces?
  • After a single file SnapRestore, some NFS users encounter stale file handles unless they do what?
  • During a resync, SnapMirror will...
  • Which of the following is NOT a valid data protection solution?
  • Is an external Certification Authority mandatory for NSE deployments?
  • Which command on the storage system displays performance statistics for resources such as CPU, NVRAM, network interface, and disks?
  • In NetApp, which command would you use to display the Fibre Channel initiator WWPNs that logged into the system?
  • What utility on the storage system will allow you to capture network packet information?
  • The super user receives an 'Access Denied' message when attempting to access a newly mounted qtree. What's the most likely cause of this error?
  • In a Fibre Channel configuration, which term correctly describes the storage system side of the connection?
  • The LUN clone lun0.clone is created under which volume path?
  • Which feature will cause Node 2 to monitor this error condition for a period of three minutes by default, and then forcibly take over Node 1 if the error condition persists?
  • Which type of copy must be performed for the initial backup of an Open Systems platform directory to the SnapVault secondary storage?
  • Which command-line option configures takeover partner address on an interface?
  • Which action is commonly used to ensure incremental backups after a volume SnapRestore operation, according to best practices?
  • Which of the following statements about LUN creation in Data ONTAP is true based on the given configuration?
  • Which of the following is a valid path for SnapMirror log files on a NetApp 7-Mode system?
  • A newly mounted qtree issues an Access Denied message for the super user due to ntfs security style. Which option is most likely true?
  • Which SnapRestore option would you use to restore to a different directory when that directory already exists?
  • Which of the following is NOT a valid object for UNIX Open Systems SnapVault backups on a UNIX server?
  • What should you do first to resolve a clustered failover issue where NFS operations fail during takeover but work after giveback?
  • Which command creates a new SyncMirror aggregate, letting Data ONTAP select the disk drives?
  • What security mechanism can an administrator use on an OSSV client to set permissions allowing backups to a SnapVault secondary system?
  • Which command would reveal LUN mapping information when unsure of the LUN details?
  • Which command would you use to resume scheduled updates after pausing a SnapMirror relationship?
  • To collect per client NFS statistics on a storage system, the option must be set on.
  • Which event triggers a SnapMirror automatic restart?
  • Which statement correctly describes the baseline for the LUN clone command as shown in the example?
  • Which file stores the export rules for directories and volumes in a storage system?
  • Which command would you use to view Ethernet interface statistics on the storage system?
  • Which migration options are supported when upgrading from 32-bit to 64-bit: combination of qtrees via QSM and volumes via ndmpcopy corresponds to which choice?
  • Which command provides basic information about network connections?
  • Is a volume SnapMirror relationship allowed between two SnapLock Compliance volumes if the destination volume has unexpired WORM files?
  • Which command is used to set the configuration of an Ethernet network interface?
  • Which statement about NetApp encryption in ONTAP 8.1.1 Cluster-Mode is accurate?
  • To persist takeover interface configuration across reboots, which file must store the partner address for the interface?
  • To verify iSCSI service status, which command would you execute?
  • Do SnapLock volumes support per-file retention periods?
  • Which SnapMirror destination-side command would you use to establish the initial migration?
  • The snapvault snap sched -x command is used to schedule which type of backups?
  • What is the correct format for the scheduling component of a SnapVault schedule?
  • Which option in the snap restore command allows you to specify a different directory, as long as the directory already exists?
  • Which command displays the statistics for Ethernet network interfaces?
  • Which statement is true about the ASIS deduplication license with OnTap 8.1?
  • Which action will cause a currently in-sync SnapMirror relationship to fall out of sync if performed on the destination?
  • Which utility on the storage system can read and analyze a packet trace file generated by the storage system?
  • Which statement about SnapLock volumes is NOT true?
  • NDVM is supported on which of the following volumes?
  • Which command would verify that disks are connected and have dual paths in a fabric-attached MetroCluster?
  • The OSSV agent on the primary system listens to TCP port 10000 for all SnapVault communications.
  • Which command verifies that the iSCSI service is running?
  • What is the maximum distance between a standard clustered pair operating at 2Gbps?
  • Which command changes the NDMP password on the Open System SnapVault agent?
  • A SnapVault secondary volume can contain up to 251 Snapshot copies for data protection. Which statement best reflects the limit?
  • Using the output, what would your determination be about Solaris LUNs and their mappings?
  • Which statement is NOT a prerequisite for using SnapRestore?
  • For each Open Systems platform directory to be backed up to the SnapVault secondary storage system, you must execute _____.
  • What command would create a LUN clone named lun0.clone from the LUN lun0 on the volume vol2?
  • To manage SnapVault relationships with an NDMP management application, which credential must be specified?
  • Which other utility can read and analyze a packet trace file generated by the storage system?
  • When Data ONTAP creates a weekly, nightly, or hourly snapshot, the value of n increases; the higher the value of n, the _________ the snapshot.
  • Which exportfs option will temporarily export the resource while ignoring the options specified in the /etc/exports file?
  • In a NetApp storage system, which of the following types of access is associated with LUNs in SAN configurations?
  • Before running lun setup on the storage system, you must first create the igroup to which the initiator will be attached.
  • When integrating SnapVault with an NDMP management application, which piece of information must be provided?
  • The remote node state required for cf forcetakeover -d to avoid data corruption is to ensure the remote node is powered off and inaccessible.
  • Which exportfs command will temporarily export the resource while ignoring the options specified in the /etc/exports file?
  • Data ONTAP uses inodes in an active file system to reference ______.
  • What happens after you use SnapRestore to revert a volume to a specific snapshot?
  • In fabric-attached MetroCluster, a site failure is defined as the complete failure of the primary controller and disk shelves.
  • Assume fabric-attached MetroCluster using hardware disk ownership. If the local node has its FC HBA connected to switch bank 1, it owns the disks connected to switch bank ___.
  • When using SnapRestore to restore a single LUN, the LUN must be ______.
  • If you attempt a single file SnapRestore but the directory structure no longer exists, what is the likely remedy?
  • In iSCSI, what term is established when the host logs into the target?
  • Which statement is NOT true about SnapLock volumes?
  • Which credential must be supplied to manage SnapVault relationships over NDMP?
  • An iSCSI or FC SAN implementation provides _____ access to LUNs.
  • Which is the correct description of the NDVM phases?
  • Which SnapMirror destination-side command would you use to start a resynchronization after the initial migration?
  • What is the default duration that a partner node monitors a loss connectivity condition before taking over?
  • Which NetApp utility would you use to collect FC SAN performance data for analysis?
  • A data storage system running in a SAN environment uses LUNs that are accessed via a protocol that is primarily block-oriented. This describes:
  • To configure a storage system as a member of a Windows Active Directory domain, the time on the storage system must be within plus or minus five minutes of the domain controller time.
  • The snapvault restore command is run on the _________.
  • Setting nosnapdir on a volume has what effect?
  • Which attribute identifies the location within the storage system for a LUN?
  • Which statement describes the behavior of 'aggr mirror aggrY' when run without the -m option?
  • For OSSV sources, the basic unit of SnapVault backups is the qtree.
  • To troubleshoot a LUN that cannot be accessed by a host, which command lists the current initiator group configuration?
  • In iSCSI security, which option is used to control which LUN a host can access?
  • To ensure incremental backups after a SnapRestore, you should perform a base-level backup of the volume after restoration. This statement is:
  • Which credential must be provided when configuring SnapVault relationships through NDMP management tools?
  • Which NOW site utility can be used to determine the Data ONTAP version in which a bug has been fixed?
  • The ONTAP SnapVault primary license on the target storage system is required for Open System SnapVault.
  • Operations Manager can monitor and manage only NetApp storage hosts that have the NetApp Host Agent installed.
  • Operations Manager can monitor and manage only NetApp storage hosts that have the NetApp Host Agent installed.
  • Which two options are allowed for replicating data between 32-bit and 64-bit aggregates?
  • Which OSSV tool would you use to perform an OSSV unattended installation?
  • If the security style is UNIX, CIFS client file access is determined by which of the following?
  • The largest volume that can be created on a 64-bit aggregate is ___.
  • To create a 64-bit aggregate, which optional switch/flag/parameter must be included?
  • Which set of commands should be used for troubleshooting Ethernet connectivity problems from the storage system console?
  • The SnapVault secondary system allows you to keep a separate schedule of Snapshot copies from your primary system.
  • Where is the SnapVault restore command executed to pull data from the secondary to the primary?
  • Which is the correct sequence of Non-Disruptive Volume Movement phases?
  • RSA is supported on which module type in NetApp Remote Service Agent (RSA)?
  • Which keyword alone can be used to convert an asynchronous SnapMirror relationship to a synchronous SnapMirror relationship?
  • Which SyncMirror command mirrors an existing unmirrored aggregate where the Data ONTAP selects the disk drive?
  • Which statement about deduplication on SnapVault destinations is true?
  • To automatically export volumes and directories on storage system reboot, include them in the /etc/exports file.
  • Which statement about wafl.default_security_style ntfs is accurate?
  • After upgrading to DOT 8.0 7-mode, you can convert existing 32-bit aggregates into 64-bit aggregates.
  • Protection Manager is an optional component that can be licensed and accessed from the NetApp Management Console (NMC).
  • What are three true statements about physical reallocation of data added in ONTAP 7.3? (Choose three.)
  • Which statement describes NSE certificate requirements?
  • If a SnapMirror relation is in an hourly configuration, which command would re-align the destination after using a two-day-old snapshot?
  • Which action will cause a currently in-sync SnapMirror relationship to fall out of sync?
  • Where are SnapMirror log files located on the source storage system?
  • In a fabric-attached MetroCluster, what is the maximum number of disk shelves allowed per loop?
  • What command would you run to re-create the dedupe fingerprint for a volume?
  • In a Fibre Channel configuration, which term correctly describes the host side of the connection?
  • Which credential is needed to manage SnapVault relationships via NDMP?
  • Which client-side check helps in troubleshooting stale NFS file handle issues by verifying connectivity to the storage system?
  • Which tool is available on an OSSV client to assist in starting or stopping the OSSV service, modifying NDMP settings, enabling debugging, and capturing trace files?
  • Which tool is NOT used to present statistics from the Data ONTAP counter manager?
  • Which Data ONTAP option enables system-wide throttling for all transfers?
  • Which protocol set is commonly associated with storage area networks in NetApp environments?
  • Which NetApp Storage Tier component works controller-wide on a FAS controller?
  • In a fabric-attached MetroCluster, which command would verify that disks are connected and have dual paths?
  • Which statement is true about the online state of the volume when using SnapRestore?
  • In Data ONTAP, Windows Administrator and root are exempt from user quotas and group quotas. Which of the following best reflects this exemption?
  • XML-files in /etc/stats/preset are used together with the sysstat command to customize the output. True or False?
  • In Fibre Channel configuration, the storage system's HBA is referred to as the ______.
  • Which access does an iSCSI or FC SAN provide to LUNs?
  • Which NetApp utility is used to collect performance data from both the Solaris host and the storage system for FC SAN analysis?
  • To collect per client NFS statistics on a storage system, the option nfs.per_client_stats.enable must be set on.
  • UNIX allows file access based on __________.
  • During migration from Data ONTAP 7G to 8.0 7-mode, existing non-traditional aggregates are designated as ____.
  • UNIX file access is based on __________.
  • Before running the SnapVault start command, which qtree path must be absent on the secondary system?
  • A SnapVault secondary volume can contain up to ___ Snapshot copies for data protection.
  • What does it signify if the disks are 'not owned' in a FAS2020 system?
  • Which of the following is true about LUN access in SAN environments?
  • Which statement about NTFS file access is true?
  • What describes the results of the SnapMirror resync command?
  • How do you migrate LUNs under volumes from 32-bit to 64-bit?
  • Which set of protocols provides block-level access to NetApp storage?
  • In fabric-attached MetroCluster, a site failure is described as a __________.
  • During cluster removal, which command is performed first?
  • Which command initializes RSA on the storage system?
  • To continue a SnapMirror relationship after reverting a volume with an older snapshot, which command should be used?
  • What command would you run to re-create the dedupe fingerprint for a volume?
  • sysstat -s 5 describes the behavior of which of the following?
  • Which NOW site utility provides a release comparison?
  • In the LUN clone command example, what is the name of the destination LUN?
  • How does RSA communicate with NetApp Support?
  • These are three methods of creating a LUN: lun create, lun map, lun setup.
  • Which option configures a semi-synchronous SnapMirror relationship in DOT 7.3 and higher?
  • An iSCSI ______ is established when the host initiator logs into the iSCSI target. Within a ______ you can have one or more ______.
  • To automatically export volumes and directories on reboot, include them in the /etc/exports file.
  • You are having problems accessing three recently-created LUNs. Given the output, the reason is because all of the LUNs are using the same LUN ID of 0.
  • Which NetApp Storage Tier component works aggregate-wide on a FAS controller?
  • In a volume SnapMirror relationship, the source and destination volumes must be the same size?
  • Which tool can read a NetApp packet trace file?
  • Executing wafl.default_security_style ntfs will have what effect?
  • For a SnapRestore operation, which component must exist on the storage system to select a snapshot for reversion?
  • Which iSCSI security method encrypts data between the initiator and the target?
  • In UNIX Open Systems SnapVault backups, which object is NOT a valid data set component?
  • Which best describes the host multi-pathing in storage networks?
  • Which keyword alone converts asynchronously to synchronous SnapMirror?
  • Which statement best describes the access to LUNs in iSCSI or FCP SAN implementations?
  • In a SnapMirror relationship, the size of the source and destination volumes must be the same.
  • You can avoid data corruption when issuing cf forcetakeover -d if the remote node is ________.
  • The sysstat command reports statistics for which resources?
  • Which command creates a new SyncMirror aggregate, letting Data ONTAP select the disk drives?
  • True or False: For Fibre Channel switches with both disk and tape connected, NetApp recommends creating separate zones for disk and tape devices.
  • NDVM support is limited to which type of volumes?
  • Which of the following is NOT an attribute required when creating a LUN?
  • Which license is required on the destination storage system when using NearStore Personality?
  • In SnapVault backups, what is the basic unit of the backup destination?
  • sysstat -s 5 outputs which of the following?
  • With 64-bit aggregates, the number of FlexVols that can be created on a storage controller is ____.
  • NSE requires an External Certification Authority.
  • NearStore Personality license provides what capability when used as a destination for SnapMirror and SnapVault transfers?
  • The snapvault update command is only available on the secondary system.
  • To restore a SnapVault-protected qtree from the secondary storage system to the primary storage system, which method allows overwriting the existing qtree on the primary storage system with DOT 7.3?
  • Which statement describes SnapRestore licensing requirements?
  • Which option will allow SnapMirror from this source system?
  • Which utility determines if there is sufficient disk space on the primary storage system to perform an OSSV transfer?
  • Which system is recommended as a secondary system for SnapVault?
  • Which single choice describes a feature that protects LUN overwrites by deleting snapshots when fractional reserve is 0%?
  • In an active/active takeover configuration, the surviving controller interfaces reflect the identity of which of the following?
  • Which migrations are supported from 32-bit to 64-bit aggregates?
  • Which command displays the disk ownership for both CPU modules in a FAS2020 system?
  • For aggregates or traditional volume SyncMirror to work correctly, the configuration of each plex should be identical with regard to which aspects?
  • SMB 2.0 support for Windows Vista and Windows Server 2008 is not supported. This statement is:
  • Which NetApp Storage Tier component operates at the aggregate level on a FAS controller?
  • Which command or procedure would you use to undo a volume SnapRestore operation?
  • For SnapVault NDMP management, identify the required credential.
  • Data ONTAP 8.0 7-Mode SMB 2.0 support for Windows Vista and Windows Server 2008 is:
  • Which LUN command creates a snapshot of a LUN?
  • After quiescing a SnapMirror relationship, which command resumes scheduled updates?
  • Protection Manager is an optional component of the Operations Manager that can be licensed and accessed from the NetApp Management Console (NMC).
  • The snapvault snap sched -x command is used to:
  • Which command would you use to re-align a SnapMirror relationship after reverting using an older snapshot?
  • Which of the following is NOT a valid LUN command?
  • To remove a cluster setup, you must perform these steps: cf disable, unlicense cluster, remove partner entries for network interfaces, halt and make partner-sysid blank, power down and remove the cluster interconnect card, and then perform the same steps on the partner node. True or False?
  • Which OSSV client tool provides a graphical interface to manage OSSV settings such as NDMP and debugging?
  • Which NetApp Virtual Storage Tier component works at the host level?
  • Which NetApp Virtual Storage Tier component works at the host level?
  • Without an external CA, NSE will operate.
  • To throttle SnapVault transfers, which commands support the -k throttling option?
  • Which command on the SnapMirror destination storage system would initialize the relationship?
  • NSE deployments rely on external certificate authority.
  • To share the directory /vol/vol2/home with the CIFS share name 'netapp', which command would you use?
  • Which condition triggers the expansion from 32-bit to 64-bit aggregates in NetApp Data ONTAP?
  • Each storage system in a cluster must have network access to the __________.
  • Which OSSV tool would you use to perform an OSSV unattended installation?
  • How can you throttle SnapVault updates and baseline transfers so that the primary or secondary is not transmitting data as fast as it can?
  • NTFS allows file access based on which components?
  • Are snapshot copies for SnapLock volumes deleted automatically according to the retention count set in the Snapshot schedule?
Subscribe

Get the latest from Passetra

You can unsubscribe at any time. Read our privacy policy